Banner Default Image

Fibre

​An optical fiber (or fibre in British English) is a flexible, transparent fiber made by drawing glass (silica) or plastic to a diameter slightly thicker than that of a human hair.[1] Optical fibers are used most often as a means to transmit light[a] between the two ends of the fiber and find wide usage in fiber-optic communications, where they permit transmission over longer distances and at higher bandwidths (data transfer rates) than electrical cables. Fibers are used instead of metal wires because signals travel along them with less loss; in addition, fibers are immune to electromagnetic interference, a problem from which metal wires suffer.[2] Fibers are also used for illumination and imaging, and are often wrapped in bundles so they may be used to carry light into, or images out of confined spaces, as in the case of a fiberscope.[3] Specially designed fibers are also used for a variety of other applications, some of them being fiber optic sensors and fiber lasers.[4]

Optical fibers typically include a core surrounded by a transparent cladding material with a lower index of refraction. Light is kept in the core by the phenomenon of total internal reflection which causes the fiber to act as a waveguide.[5] Fibers that support many propagation paths or transverse modes are called multi-mode fibers, while those that support a single mode are called single-mode fibers (SMF).[6] Multi-mode fibers generally have a wider core diameter[7] and are used for short-distance communication links and for applications where high power must be transmitted.[8] Single-mode fibers are used for most communication links longer than 1,000 meters (3,300 ft).[citation needed]

Being able to join optical fibers with low loss is important in fiber optic communication.[9] This is more complex than joining electrical wire or cable and involves careful cleaving of the fibers, precise alignment of the fiber cores, and the coupling of these aligned cores. For applications that demand a permanent connection a fusion splice is common. In this technique, an electric arc is used to melt the ends of the fibers together. Another common technique is a mechanical splice, where the ends of the fibers are held in contact by mechanical force. Temporary or semi-permanent connections are made by means of specialized optical fiber connectors.[10]

The field of applied science and engineering concerned with the design and application of optical fibers is known as fiber optics. The term was coined by Indian-American physicist Narinder Singh Kapany, who is widely acknowledged as the father of fiber optics.[11]

​Royal Leamington Spa, commonly known as Leamington Spa or simply Leamington /ˈlɛmɪŋtən/ (About this soundlisten), is a spa town and civil parish in Warwickshire, England. Originally a small village called Leamington Priors, it grew into a spa town in the 18th century following the popularisation of its water which was reputed to have medicinal qualities.[2] In the 19th century, the town experienced one of the most rapid expansions in England.[3] It is named after the River Leam, which flows through the town.

The town contains especially fine ensembles of Regency architecture,[4] particularly in parts of the Parade, Clarendon Square and Lansdowne Circus.

In the 2011 census Leamington had a population of 49,662.[1] Leamington is contiguous with the neighbouring towns of Warwick and Whitnash; these form a combined urban area which in 2011 had a population of 95,172.[5]

Latest jobs