Jobs
Vibratory Tumbling Media
Vibratory Tumbling Media
2.3.1 Consider the material of your parts:
Different types of media are suitable for different materials. For example, ceramic media with brown aluminum oxide abrasive is commonly used for the general deburring of hard metal materials, while plastic media is often used for aluminum and zinc die-casting parts.
2.3.2 Determine the desired finish:
Different types and shapes of media can produce different finishes. For example, ball-shaped media can produce a smoother finish, while pyramid-shaped media can be more aggressive in cutting and producing a matte finish.
different media shapes
2.3.3 Choose the appropriate size of media:
The size of the media should be smaller than the parts to ensure efficient tumbling and prevent parts from getting lodged. If the parts are much smaller than the media, you may need to consider using a reverse separation process.
2.3.4 Consider the shape of the media:
The shape of the media should be chosen based on the shape and complexity of the parts being tumbled. Choose media with shapes that are less likely to lodge in or damage your parts.
2.3.5 Determine the media-to-parts ratio:
The amount of media in the tumbler is critical to achieving a successful tumbling process. Generally, a 3:1 media-to-parts ratio is recommended for most tumbling applications. However, delicate parts may require a higher media-to-parts ratio to prevent parts-on-parts impingement.
2.3.6 Test and adjust:
It's important to test and adjust the tumbling process to ensure the desired finish is achieved. Make adjustments to the type, size, shape, and amount of media until the desired finish is achieved.
2.4 Compound and Water
Choosing the right compound for your vibratory finishing process is a critical step in achieving the desired finishing result. Consider the material being finished, the desired finishing result, and any environmental and safety factors when choosing a compound, and be sure to follow the manufacturer's instructions when diluting the compound.
Woodhall Spa is a former spa town and civil parish in the East Lindsey district of Lincolnshire, England, on the southern edge of the Lincolnshire Wolds, 6 miles (10 km) south-west of Horncastle, 23 miles (37 km) west of Skegness, 15 miles (24 km) east-south-east of Lincoln and 17 miles (27 km) north-west of Boston. It is noted for its mineral springs, historic cinema and its Second World War association with the RAF 617 Squadron, commonly referred to as 'The Dambusters'.
Much of the village's Victorian elegance remains, with large parts of the centre being designated as a conservation area since January 1991.[2]
